DC-ITContainer
DC-ITContainer - Mobile. Modular. Indestructibly Good.
The DC-ITContainer protects from dust, debris, fire, rain, extinguishing water and unauthorized access. The use is so flexible that you can put it inside or outside or switch quickly from one to the other, whichever way you need it. Moreover, the DC-ITContainer contains great features like warm and cold aisles, movable racks, energy efficient cooling, UPS-system and, optionally, a DC-MonIToring Agent for the IT and the transfer of fault messages.
Description
In times of explosively growing amounts of data you often face a lack of space in IT-surroundings. Our solution is the modular DC-ITContainer. Available in a 20 ft or 40 ft design, the ISO-container is constructed to withstand even the hardest strains. The robust and entirely welded container construction qualifies as a durable solution, e. g. in production halls or out in the open. It withstands everything. It also qualifies as an interim solution that can be transported easily and is therefore always flexible and mobile.
Moreover, the DC-ITContainer is a plug & play solution: Quickly connected to the power supply after the delivery, it is instantly in running order. Hence, the time between order and initial operation is significantly shorter than for a conventional data center. On top of that, the process is much cleaner: There are no on site adjustments necessary - there just needs to be enough space for the respective statics of the container.
The DC-ITContainer is also suitable for the setup of edge-infrastructures, e. g. at production sites. Why? Because the demand for turnkey-ready data center solutions, that are modular, secure and high-available, keeps on growing, especially in times of digitalization and growing automation. Consequently, they can be realized flexibly and in a timely manner.
Open BrochureTechnical Details
| Technical Information | DC-ITContainer ITC 20 | DC-ITContainer ITC 40 | DC-ITContainer Granite 20 and 40 |
|---|---|---|---|
| Length (external/internal) | 6.058 / 5.420 mm | 12.192 / 11.550 mm | 6.058 / 5.330 mm or 12.192 / 11.460 mm |
| Width (external/internal) | 2.438 / 2.140 mm | 2.438 / 2.140 mm | 2.438 / 2.040 mm |
| Height (external/internal) | 2.896 / 2.550 mm | 2.896 / 2.550 mm | 2.896 / 2.440 mm |
| Amount 482,6 mm (19") racks, 43 HU, 600 x 1000 mm WxD (racks for IT, technology, cooling) | max. 6 | max. 16 | max. 16 |
| Cooling (100 % redundant) | 2 front coolers | 2-4 front coolers | 2 or 2-4 front coolers |
| UPS | ✔ | ✔ | ✔ |
| Early Fire Detection/ Extinguishing System | ✔ | ✔ | ✔ |
| Hot Aisle Containment | ✔ | ✔ | ✔ |
| Electrical Subdistribution Unit | ✔ | ✔ | ✔ |
| Floor | Plafond floor (raised floor optional) | Plafond floor (raised floor optional) | Plafond floor (raised floor optional) |
| Excess Pressure Flap (pneumatic) | ✔ | ✔ | ✔ |
|
|
|
|
|
| Protective Features |
|
|
|
| Fire Protection | EI90/F90 | EI90/F90 | R60D acc. to EN 1047-2 and EI180/F180 |
| Anti-Burglary Protection | RC 3 (RC 4 optional) | RC 3 ( RC 4 optional) | RC 3 (RC 4 optional) |
| Dust Protection IP 56 acc. to EN 60529 | ✔ | ✔ | ✔ |
| Protection from Extinguishing Water IP 56 acc. to EN 50629 | ✔ | ✔ | ✔ |
| Flue Gas Imperviousness acc. to EN 1634-3 | ✔ | ✔ | ✔ |
Baseline Security against Physical Dangers
Fire Protection
One fire protection is not like the other. There are special requirements for the IT!
Anti-Burglary Protection
Protect your IT-infrastructure from burglary or unauthorized access.
Explosion Protection
So your IT stays intact in the worst-case scenario
Protection from Debris Load
Your IT is protected in case the primary building elements cave in.
Protection from Vandalism
Protect your IT-infrastructure from willful destruction and vandalism.
Water and Dust Protection
Water and dust protection according to EN 60529 for the protection of hardware and data.
Emission Protection
Ideal protection from eavesdropping operations and electromagnetic emission.
Noise Protection
Reduce the acoustic level of your server room.
Protection from Corrosive Gases
Protect your IT from corrosive gases.
UPS-Systems
Uninterrupted Power Supply in a Worst Case Scenario
UPS systems are used wherever you cannot afford any downtimes. In case of a blackout, the UPS solution takes over the operation in order to prevent loss of data or damage to the IT. Modern UPS systems are equipped with a double conversion online topology that aims for an accurate voltage and frequency regulation, an absolutely uninterrupted shift between mains supply and battery supply as well as a performance factor adjustment.
Power Distribution Unit (PDU)
Power Distribution Units are More than Just a Name - Because They Have Become Quite Intelligent
Power Distribution Units do a lot more than "just" bring the power to the terminal device. Our intelligent and active PDU systems have several control panels and can control specific outlets separately. They can also turn them all on or off at the same time, e. g. if there were any rules made and the determined conditions apply. There are also a lot of safety features within the intelligent PDUs, like the integration of safety logs, which prevent unauthorized access, or alarm signals that are sent if a predefined safety limit is exceeded or undershot at a performance measurement.
DC-MonIToring - DCM Agent
What Is the Basis of Action? Information! After All, Information Leads to Knowledge in Action
The DCM Agent is an indispensable part of the DC-ITContainer because it offers countless options in the smallest spaces: It reads and collects the functional and operational information data of the entire IT inside the data center at the respective measuring points. It compares and assesses the actual figures with the set values through predefined features. If incorrect temperatures, too much humidity, water inlet, fire, smoke or motion detection as well as abnormalities with the access control or the power surveillance appear, the DCM Agent will send fault reports via e-mail or SMS to you or to the Network Operation Center (NOC).
More about this.
Certified Quality MADE IN GERMANY
The DC-ITContainer is available in two standard sizes and two fire safety values that impress with the classic "Made in Germany" quality. In case of the DC-ITContainer FLEX, the dimension can vary depending on the customer's requirements. All designs offer great safety, including protection from physical dangers like fire, water, burglary or dust deposit. The standard model of the DC-ITContainer is equipped with EI90/F90 fire protection whereas the GranITe-version guarantees a fire protection according to EN 1047-2 and EI 180/F180.
Both, the DC-ITContainer and the DC-ITContainer GranITe are available as 20 ft or 40 ft High-Cube ISO-Containers. They contain an integrated fire door with smoke protection and anti-burglary protection as well as an access control. Inside the DC-ITContainer are 19"-racks and 19"-UPS-systems, protected by early fire detection and a fire extinguishing system and they are cooled by a redundant Inverter-DX technology. The floor of the container is available including a dissipative rubber-coating or as a raised floor.